.avif)
Incorporating a 50mm rib height with wide flutes, Multidek® provides excellent water carrying capacity, and is particularly suited in areas where high density rainfall could be expected. As a relatively wide 500mm profile, installation cost savings can be expected over other similar profiles. Manufactured from high strength material and supplied in a wide range of substrates and surface finishes, Multidek® lends itself to most types of projects whether commercial, industrial or residential.
Get in touch
Displays a wider effect of the seam providing a striking appearance in both roofing and cladding situations.
• 12mm Aesthetic flat rib
• Waterfall feature at Wall/roof join
• No swages
• Installed over plywood
• Curving- both Convex and Concave
• Most metal substrates and paint coatings
.avif)
A traditional tray profile which offers superior performance in high winds, rainfall and snow
• Suitable for Drape Curving
• Ideal roof in snow conditions at low pitch
• Installed over plywood
• Suitable for use with Copper, Natural Zinc and Aluminium substrates
• Roofing application only
Displays the boldest effect of any of the Eurostyle® profiles with highly defined longitudinal lines providing light and shade variations
• Board and Batten effect
• Roofing and cladding
• Five (5) Standard pan widths
• Installed over plywood with drainage matting for air flow recommended
A seamed cap profile that offers variable shading in any roof or wall cladding application, yet providing minimalistic lines
• Can be installed without change of Pitch Flashing. (More flowing effect)
• Ideal for Convex Curving
• Particularly suitable as Copper and Natural Zinc substrate
• Installed over plywood with drainage mat for airflow recommended
Ideal cladding profile that provides a similar but slightly bolder appearance to Double Standing Seam, however is secret screw fixed and clipped together rather than seamed. Recommended maximum length 6000mm
• Ideal Cladding profile
• Installed over plywood
• Nail Strip - No clips
• Recommended maximum sheet length – 6000 mm
• Faster install
.jpg)
An interlocking panel available with negative detail variable recessed joint up to 15mm for soffits and wall paneling
Download the brochure below to get comprehensive profile technical information for this product
Zincalume® Steel: 0.48mm or 0.55mm BMT, AZ150 (150gm/m²) G550 Mpa Yield Stress Galvanised Steel: 0.48mm or 0.55mm BMT, Z450 (450gm/m²) G550 Mpa Yield Stress Pre-painted
A full range of matching accessories is available, including Ridging, Ridgecaps, Flashings, Underlays, Insulation, Fasteners, Rotary Roof Ventilators and Rainwater systems.
.avif)
.webp)
Fixings and fasteners are to be of an approved type, compatible with all materials, the environment and meeting the requirements of the NZ Building Code. Installation is to be in accordance with E2/AS1 and the NZ Metal Roof and Wall Cladding Code of Practice.
Get in touch if outside the scope of E2/AS1
Drawings can be found under CAD/PDF details on EBOSS
.avif){kind=icon}
Metal Roofing & Cladding maintenance brochure
Download guideAppropriate handling and storage of profiled metal roofing and cladding, translucent and transparent roofing products plus roofing accessories is important to prevent damage which in turn will limit performance once installed. The following guidelines should be strictly followed in order to ensure the project is completed satisfactorily and meets product warranty conditions.
Download guideZincalume® Steel: 0.48mm or 0.55mm BMT, AZ150 (150gm/m²) G550 Mpa Yield Stress Galvanised Steel: 0.48mm or 0.55mm BMT, Z450 (450gm/m²) G550 Mpa Yield Stress Pre-painted
Below you can find the product installation guide and Building Product Information System (BPIS), available to download.
Installation GuideInstallation GuideBPIS Class 2BPIS Class 1Multidek® 500 is a strong, bold roofing and wall cladding profile which is attached to roof supports using a concealed clip fastening system and with no need to penetrate the roofing material and ultimately eliminating water leakage concerns at fastening points. Manufactured from high strength material and supplied in a wide range of substrates and surface finishes, Multidek® lends itself to most types of projects whether commercial, industrial or residential.
Download BrochureFeatured on Grand Designs NZ, this stunning Passive House in Featherston brings together Scandinavian form with NZ-made Multidek® metal roof
Check it outWe have partnered up with EBOSS, ProductSpec and MasterSpec to deliver an optimal content delivery method for our customers.
.avif){kind=logo}
.avif)
.avif)
.avif)
.webp)
.webp)
