Multidek

DESCRIPTION

Multidek® 500 is a strong, bold roofing and wall cladding profile which is attached to roof supports using a concealed clip fastening system, ultimately eliminating water leakage concerns at fastening points.

Incorporating a 50mm rib height with wide flutes, Multidek® provides excellent water carrying capacity, and is particularly suited in areas where high density rainfall could be expected. As a relatively wide 500mm profile, installation cost savings can be expected over other similar profiles.

Manufactured from high strength material and supplied in a wide range of substrates and surface finishes, Multidek® lends itself to most types of projects whether commercial, industrial or residential.
 

Download Product Information
APPLICATIONS
 

  • Residential roofing and cladding
  • Industrial and commercial roofing and cladding
  • Rural and lifestyle roofing and cladding
  • Dairy sheds 
  • Canopies
  • Carports and fencing
     

 

MAINTENANCE AND PRODUCT SELECTION

Reference should be made to the manufacturer for the appropriate finish for a particular environment. Zincalume based products should not be used in some special environments including intensive animal shelters. Areas unwashed by rain should be washed twice yearly. In severe and very severe environments post painting of Galvanized and Zincalume material is recommended.

 

Environmental usage guide for New Zealand

  

ISO

Cat 1 to 2

Cat 2to 3

Cat 4

Cat 5

Catergory

Mild &

Moderate Marine

Severe Marine

Very Severe Marine
 

Moderate

Moderate Industrial

Severe Industrial

Very Severe Industrial
     

Geothermal

Severe Geothermal

Product

        

Galvsteel

        

Zincalume

        

Colorcote ZR8

      

Colorsteel Endura

      

Colorcote ZRX

      

Colorsteel Maxx

      

Colorcote AR8 & ARX Aluminium

    

Colorsteel, Endura, Maxx, Zincalume and Galvsteel are registered trademarks of New Zealand Steel Limited.

Colorcote, ZR8, ZRX, AR8 and ARX are registered trademark of Pacific Coilcoaters.

  • Reference should be made to the coil and paint manufacturers’ own literature before choosing an appropriate finish.
  • As part or our continuous improvement program, information contained within this data sheet is subject to change.

Multidek™ is a registered trademark of Roofing Industries Limited.

 

For more information about any of our products, contact us today